Journal Publications

M M Toropova and C A Steeves. Lightweight multifunctional thermally tailored lattices. Smart Materials and Structures, 29(3), 2020.

S C Chung and C A Steeves. Mixed-dimensional modeling of structures with thin coatings using rotation-free elements. Computers and Structures, 231(15), April 2020.

B V Bhaga and C A Steeves. Modeling hybrid polymer-nanometal lightweight structures. Aerospace Systems, 2, pp. 119-124, 2019.

A G Passos, M A Luersen and C A Steeves. Optimal curved fibre orientations of a composite panel with cutout for improved buckling load using the Efficient Global Optimization algorithm. Engineering Optimization, 49(8), pp. 1354-1372, August 2017.

M M Toropova and C A Steeves. Bimaterial lattices as thermal adapters and actuators. Smart Materials and Structures, 25(11), October 2016.

M A Luersen, C A Steeves and P B Nair. Curved fiber paths optimization of a composite cylindrical shell via Kriging-based approach. Journal of Composite Materials, 49(29), pp. 3583-3597, December 2015.

M M Toropova and C A Steeves. Adaptive bimaterial lattices to mitigate thermal expansion mismatch stresses in satellite structures. Acta Astronautica, 113, pp. 132-141, August 2015.

J T Hwang and C A Steeves. Optimisation of 3-D lattice cores in composite sandwich structures. Journal of Composite Materials, 49(17), pp. 2041-2055, July 2015.

M M Toropova and C A Steeves. Bimaterial lattices with anisotropic thermal expansion. Journal of Mechanics of Materials and Structures, 9(2), pp. 227-244, 2014.

A T Lausic, C A Steeves and G D Hibbard. Effect of grain size on the optimal architecture of electrodeposited metal/polymer microtrusses. Journal of Sandwich Structures and Materials, 16(3), pp251-271, May 2014.

C A Steeves. Optimising sandwich beams for strength and stiffness. Journal of Sandwich Structures and Materials, 14(5), pp. 573-595, September 2012.

J J Chu and C A Steeves. Thermal expansion and recrystallization of amorphous Al and Ti: a molecular dynamics study. Journal of Non-Crystalline Solids, 357(22-23), pp. 3765-3773, November 2011.

C A Steeves and A G Evans. Optimisation of thermal protection systems utilising sandwich structures with low coefficient of thermal expansion lattice hot faces. Journal of the American Ceramic Society, 94 Supp 1, pp. S55-S61, June 2011.

C A Steeves, C Mercer, E Antinucci, M Y He and A G Evans. Experimental investigation of the thermal properties of low expansion lattices. International Journal of Mechanics and Materials in Design, 5(2), pp. 195-202, May 2009.

C A Steeves, M Y He, S D Kasen, L Valdevit, H N G Wadley and A G Evans. Feasibility of metallic structural heat pipes as sharp leading edges for hypersonic vehicles. ASME Journal of Applied Mechanics, 76(3), May 2009.

C A Steeves, K H Timpano, P T Maxwell, L Martinelli and R B Miles. Design and manufacture of a morphing structure for a shape adaptive supersonic wind tunnel nozzle. ASME Journal of Applied Mechanics, 76(3), May 2009.

C A Steeves, M Y He and A G Evans. The influence of coatings on the performance of structural heat pipes for hypersonic leading edges. Journal of the American Ceramic Society, 92(2), pp. 553-555, February 2009.

C A Steeves, S L dos Santos e Lucato, M Y He, E Antinucci, J W Hutchinson and A G Evans. Concepts for structurally robust materials that combine low thermal expansion with high stiffness. Journal of the Mechanics and Physics of Solids, 55(9), pp. 1803-1822, September 2007.

C A Steeves, H N G Wadley, R B Miles and A G Evans. A magnetohydrodynamic power panel for space re-entry vehicles. ASME Journal of Applied Mechanics, 74(1), pp. 57-64, January 2007.

C A Steeves, Y L Young, Z Liu, A Bapat, K Bhalerao, A B O Soboyejo and W O Soboyejo. Membrane thickness design of implantable bio-MEMS sensors for the in-situ monitoring of blood flow. Journal of Materials Science: Materials in Medicine, 18(1), pp. 25-37, January 2007.

C A Steeves and N A Fleck. In-plane properties of composite laminates with through-thickness pin reinforcement. International Journal of Solids and Structures, 43(10), pp. 3197-3212, May 2006.

C A Steeves and N A Fleck. Compressive strength of composite laminates with terminated internal plies. Composites Part A, 36(6), pp. 789-797, June 2005.

C A Steeves and N A Fleck. Material selection in sandwich beam construction. Scripta Materialia, 50(10), pp. 1335-1339, May 2004.

C A Steeves and N A Fleck. Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part I: analytical models and minimum weight design. International Journal of Mechanical Sciences, 46(4), pp. 561-583, April 2004.

C A Steeves and N A Fleck. Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part II: experimental investigation and numerical modelling. International Journal of Mechanical Sciences, 46(4), pp. 585-608, April 2004.